Laboratory Equipment
Not only do we provide laboratory furniture to outfit your lab and facilitate basic functions, but we also offer gas generators and water purification systems for a more efficient lab performance.
-
- Mobile Ductless Fume Hood NF800
- Model: NF800
- Standard:
Interior Size: (L)786×(D)560×(H)760mm
Exterior Size:(L)800×(D)620×(H)890mm - Accessories: indoor TVOC monitoring, remote monitoring
- Worktop: 19mm thick epoxy resin board, ceramic panel, tempered glass
-
- Bench-mount Ductless Fume Cupboard NF1300
- Model: NF1300
- Standard:
Interior Size:(L)1286mm×(D)690mm×(H)760mm
Exterior Size:(L)1300mm×(D)790mm×(H)920mm - Features: Equipped two filters
-
- Mobile Ductless Fume Cupboard NF1600
- Model:NF1600
- Standard:
Interior Size:(L)1586 mm×(D)690 mm×(H)760mm
Exterior Size:(L)1600 mm×(D)790 mm×(H)930mm - Features: Equipped two filters
-
- EXCEED Lab Water Purification System
- Model: EXCEED
- Size: Tabletop (6~32L/H): 400mm(L)×450mm (W)×480mm (H)
Floor-standing (more than 40L/H): 400mm (L)×450mm(W)×850mm(H)
Exterior Size:(L)1300mm×(D)790mm×(H)920mm - Weight:25~65kg
-
- ADVANCED-II Lab Water Purification System
- Model: ADVANCED-II
- Standard:Size:385mm(L)×450mm(W)×450mm(H)
- Weight:35~45kg
- Inlet Water:Ground water (temperature: 1~45oC, pressure: 1~5kg) TDS<650ppm
-
- ADVANCED-I Lab Water Purification System
- Model: ADVANCED-I
- Standard:Size: 385mm(L)×450mm(W)×450mm(H)
- Inlet Water:Ground water (temperature: 1~45o C, pressure: 1~5kg) TDS<350ppm
-
- DISCOVER-IV Lab Water Purification System
- Model:DISCOVER-IV
- Standard:Size: 400mm(L)×450mm(W)×570mm(H)
- Inlet Water:Tap water (temperature: 5~40oC, pressure: 1~5kg) TDS<350ppm
- Description:This water purification system is used to make both reverse osmosis water and ultra-pure water. It conforms to CAP, ASTM, and NCCLS ultra-pure water standards.
-
- DISCOVER- III Lab Water Purification System
- Model: DISCOVER-III
- Standard: Size: 400mm(L)×450mm(W)×570mm(H)
- Inlet Water: Tap water (temperature: 5~40oC, pressure: 1~5kg) TDS<350ppm
- Description: This water purification system is used to make both reverse osmosis water and ultra-pure water. It conforms to CAP, ASTM, and NCCLS ultra-pure water standards.
-
- Nitrogen Generator
- Model:NA500
- Standard:Environmental Temperature: 10-40℃
- Water Consumption:approx. 10ml/h
- Water Quality: distilled water or purified water or deionized water
-
- Hydrogen Generator
- Model:HA500
- Standard: Environmental Temperature: 10-40℃
- Water Quality: distilled water or deionized water
- Dimension:420*200*330mm (L*W*H)
-
- Air Generator (Low Noise)
- Model: AA5000
- Standard: Dimension: 420*200*350mm (L*W*H)
- Output Connector: 3mm or 1/8in compression fitting (M8×1 external thread)
- Consumption Power: 180W